Description

1000W Pure Sine Wave Inverter Power Board Post Sine Wave Amplifier Board DIY kit Description: Notice: This is a DIY Kit , buyers need to weld the component by yourself ! DIY kit installation requires some basic electronic production and practical ability, there is the risk of damage during the process of installing, once the board is powered on, we are not responsible for the components. thanks for your understanding. No instruction and diagram. Using the function: You can change the modified sine wave inverter sine wave inverter output power 1000W. Simple, the modified sine wave inverter stage after removed, and then the transformer secondary Cadogan laps, the modified sine wave inverter voltage capacitors for-220UF / 450V, then the test voltage capacitor voltage is DC380V, then use 2pc 0.4 copper transformer inside around four laps, this voltage is about AC16 on it, and then these voltage is supplied to the board after the sine wave inverter stage, after the output level board AC110v /120v /220v, the output waveform: pure sine wave. Technical parameters: Input voltage: DC380V. Input voltage: AC16V. Output voltage: AC 220V. (Input voltage is constant) Output frequency: 50 / 60HZ (adjustable) Output waveform: pure positive wave. PCB size: 165 * 100 * 50MM. Contains a pure sine wave inverter Driver Board "EG8010 + IR2110" 1000W use power tube: 4/20N60 (picture are for reference only) Included: 1PC 1000W Diy Pure Sine Wave Inverter Power Board Amplifier Board kit